584,814 active members*
5,484 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Deckel, Maho, Aciera, Abene Mills > DMU 80T - manual tool change (horizontal spindle)
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2019
    Posts
    1

    Question DMU 80T - manual tool change (horizontal spindle)

    Hello!

    I have DMU80T / Heidenhain 430 / with integrated rotary table, manual adjustable head and automatic tool changer.

    Sometimes we change the tool manually when it's too long.

    I've met a problem with manual tool change with head rotated (for example to horizontal position).
    Each time machine tells me that I can't change the tool because it's not in vertical position to reach tool magazine.
    But when I want to change the tool manually it doesn't matter if it's horizontal...

    Anyway the only solution I found is to put head back into vertical position, then change the tool manually, then put it back to horizontal position... it takes a great time to do it sometimes...
    Generally working on horizontal spindle is annoying because of this problem.

    Anyone have the same problem, and any horizontal-fast-toolchange solution?

    Regards,
    Michael

  2. #2
    Join Date
    Apr 2014
    Posts
    20
    hello dear
    i have a dmu 80t itnc 530
    machine i need electrical wiring diagram please help me

    email [email protected]

  3. #3
    Join Date
    Apr 2014
    Posts
    20
    hello dear
    i have a dmu 80t itnc 530
    machine i need electrical wiring diagram please help me

    email [email protected]

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •