584,817 active members*
5,140 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2019
    Posts
    54

    Mach 3-4 recommendations

    Hi all
    Am in the process of revamping a esab combirex table with a hypertherm ht2000
    It's controller is old

    So in general is mach3-4 down at the bottom end of plasma controllers or is it as good as high end ones that you may see on 30,000 euro machines
    What is the difference,
    What can it and can it not do,
    Ie, will a high priced one run a gantry smoother / faster,
    I know some high end ones may have THC built in,

    I have mach3 on another table here and I have no problems with it so I am not putting it DOWN,

    Currently we draw on deltacad
    Map out on sheetcam
    Then send to mach3.
    Would high end controllers cut out the like of sheetcam

    Just wondering what you get for your buck out of controllers

  2. #2

    Re: Mach 3-4 recommendations

    any one can tell me about mach4 ?

  3. #3
    Join Date
    Apr 2005
    Posts
    304

    Re: Mach 3-4 recommendations

    Did you check official Mach3/4 site?

    https://www.machsupport.com/
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

Similar Threads

  1. Mach 3 parts counter and hour meter mach...
    By [email protected] in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 01-31-2015, 04:18 AM
  2. Mach 3 - Driver Test results VMWare player (XP -> Mach 3)
    By itolond in forum Machines running Mach Software
    Replies: 1
    Last Post: 04-07-2014, 01:32 PM
  3. Mach 3 + G540 + UC100 + WJ200 = Can't run spindle from Mach 3?
    By zer0fighter in forum Benchtop Machines
    Replies: 20
    Last Post: 09-08-2013, 10:54 PM
  4. Replies: 3
    Last Post: 05-14-2010, 09:16 AM
  5. Confused: Mach Turn, Mach Mill, Mach 2/3 ?
    By CanSir in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 02-16-2007, 11:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •