Originally Posted by
elsanch
ive used a roatary broach in the past on swiss machines without timing....i have also used the broach with timing/ clocking.....the problem is, i dont remember how to set the o-ring fixture for the broach. i remember we engaged at C0. (and spindle stopped) then we turned on the spindle, and broached to full depth, at the bottom of the hole, we indexed back to C0., so the broach would essentially retract back at the same clocking position. i
i need help on setting up the o-ring fixture. i know we made some kind of aluminum holder/adapter.
thanks
[email protected]
What machine model and control are you working with??
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com