[cyclestart]

What's the easy way to renumber lines of code, set line increments, etc with Mach3? Currently I'm using Notepad which frankly bites, or else I don't know how to use it properly. This issue came up when running the roadrunner.tap sample code. Everything stopped part way through. Suspect the demo code limit was reached.

signed
A linux user in foreign territory

[ger21]

Probably the limit. Mach3 will just stop at about 1000 lines of code.

You could load it into Excel as a space delimited file, and quickly add line numbers in there. Insert a column, enter 1 in the A1 cell, and drag down.

[cyclestart]

Excel, will check to see if I have that. Found NCPlot which does a very nice job of renumbering plus has some other useful features.

Yep, roadrunner is in the 4000 line range. Explains the stoppage pretty clearly.

[hindocarina]

Here's a great program:

http://www.editcnc.com/