585,752 active members*
4,118 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Turning > Need Advice - How to program on mill/turn center

Thread: Need Advice - How to program on mill/turn center

Results 1 to 3 of 3
  1. 01-15-2021, 01:42 PM #1
    jeph45
    jeph45 is offline Member
    Join Date
    Jul 2020
    Posts
    7

    Need Advice - How to program on mill/turn center

    Good morning all.
    How would you program the following worm gear on a mill/turn center? We have a Mori Sieki NL3000 and we use Fusion 360 for our CAM software, but as far as I can tell Fusion doesn't have the capability to program this, since it would need multiple starts with a 4mm insert. Any ideas from anyone?
    Reply With Quote Reply With Quote
  2. 01-15-2021, 09:32 PM #2
    MCR-B II
    MCR-B II is offline Registered
    Join Date
    Oct 2009
    Posts
    114

    Re: Need Advice - How to program on mill/turn center

    Is it C axis machine. Better to use a C axis machine.And call a tool maker.
    Reply With Quote Reply With Quote
  3. 01-15-2021, 09:47 PM #3
    jeph45
    jeph45 is offline Member
    Join Date
    Jul 2020
    Posts
    7

    Re: Need Advice - How to program on mill/turn center

    Quote Originally Posted by MCR-B II View Post
    Is it C axis machine. Better to use a C axis machine.And call a tool maker.
    Yes it is a C-axis. You mean get a custom tool made?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Best CAM software to program broaching operation in Mill-turn center
    By visenough in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 05-26-2019, 09:44 PM
  2. need help learning to program off center thread mill on Star SR-20R
    By Ideaguy in forum CNC Swiss Screw Machines
    Replies: 0
    Last Post: 03-03-2015, 08:13 PM
  3. live center on mill turn
    By gangzilla in forum Canadian Club House
    Replies: 1
    Last Post: 07-26-2012, 07:49 AM
  4. Translator program for turn and mill
    By jchuillier in forum Uncategorised CAM Discussion
    Replies: 11
    Last Post: 02-07-2012, 03:39 PM
  5. turn mill center
    By msantaji1 in forum Haas Visual Quick Code
    Replies: 3
    Last Post: 04-30-2009, 05:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules