I am looking to see if anyone has made an adapter cable for sale, that takes the 37 pinout from an IFB Card (Artisan software interface card) to a standard 25 pinout. I need this interface cable so that I can use a Griffin Controller directly to an LPT port on a PC, thus for use with Mach3 software.
Artisan software typically uses the IFB card interface plugged on a spare port of the PC mother board. I am trying to do without it, and go directly from controller to the PC using the more modern Mach3 control software. The thing is that the Griffin controller is wired for a 37 pin connector to match the IFB card, it has separate aux and Limit SW Sub-D connectors that branch from the 37Pin connector, so I just need the interface 37 to 25 pin cable since all the pinoputs stem from the 37pin connector.
I can make one but it would save me the hassle if someone already has one for sale at a reasonable price.
Thanks IA