I’ve got a ‘93 VF-1 I’m retrofitting. I’ve been looking at DMM’s DHTA15 servos, which are 1.3kw and Nema 42 frame, for all 3 axis. I think the shaft size and length would let me re-use the old flex couplers and having all 3 the same would make things simpler. I’m pretty sure this vintage machine used the same E728 dc servos for all axis. Do these servos sound reasonable for a machine like this? I’m thinking that if anything, they are a bit larger in capacity than the OEM drives. I haven’t had any luck at all finding the specs on the old servos though..