[agflex]

Hello, sorry my english (google translator).
I really need your help.
I bought a Fvd and I can't show the Rpm on the display, just shows the frequency. In the manual does not say where to change this option, and already read in several places to change the parameter p144, but in my model this parameter does not have.


https://pt.aliexpress.com/item/32807...2742b90atvjpGQ

110v 2.2kw

Thanks a lot if anyone can help me

[agflex]

Hello. I am sending 2 pdf manuals to see if anyone can help me adjust what I need.

[Jim Dawson]

Looks like set P00.24 = 6

Maybe also need to adjust P00.23, but I think not.

[agflex]

Thanks, I did that what you said, I had tried that too.
But it still didn't work.
In P00.23 it only adjusts from 0 to 100.
in P00.24 I put in 6. Now shows on the display SP 1.
There must be somewhere else to change, but I don't know where, this is hard.

[shakil1740]

Hello, I have the same vfd did some one find out how to display rpm instead frequency on yl620-a?

[mactec54]

Hello, sorry my english (google translator).
I really need your help.
I bought a Fvd and I can't show the Rpm on the display, just shows the frequency. In the manual does not say where to change this option, and already read in several places to change the parameter p144, but in my model this parameter does not have.


https://pt.aliexpress.com/item/32807...2742b90atvjpGQ

110v 2.2kw

Thanks a lot if anyone can help me

The DISP should select the RPM, just Press it until the RPM led is on then it will show the RPM

You could try P00.24=9 this will give you all the options

[shakil1740]

The DISP should select the RPM, just Press it until the RPM led is on then it will show the RPM

You could try P00.24=9 this will give you all the options

Hi mactec54, Really appreciate for the reply,
I press DISP button 50 or more times no response, and I tried P00.24=9 displays u 9, and P00.24=6 displays SP 1, and there is no RPM display

[mactec54]

Hi mactec54, Really appreciate for the reply,
I press DISP button 50 or more times no response, and I tried P00.24=9 displays u 9, and P00.24=6 displays SP 1, and there is no RPM display

Set it back to the default=0 and try the DISP again I'm not a fan of this VFD Drive as many users have had problems with them

[Cosimino71]

Enter on 00.23 = 50/60HZ it depends on where you are in Italy and 60hz
Enter on 00.24=0
Press the program button to return to the frequency, then press nine times on set until you reach RPM spindle on the display there is a lowercase u on the bottom left with the engine running you will see the engine rpm

[mactec54]

Enter on 00.23 = 50/60HZ it depends on where you are in Italy and 60hz
Enter on 00.24=0
Press the program button to return to the frequency, then press nine times on set until you reach RPM spindle on the display there is a lowercase u on the bottom left with the engine running you will see the engine rpm

This is an old thread

He can not use 50Hz or 60Hz Parameter settings with his motor they must be set to 400Hz or he will damage his spindle motor

[Cosimino71]

This is an old thread

He can not use 50Hz or 60Hz Parameter settings with his motor they must be set to 400Hz or he will damage his spindle motor

If on 00.23 you put 400hz the spindle marks 6000 rpm as the maximum speed, if you put 60hz the spindle reaches 24000 rpm

[mactec54]

If on 00.23 you put 400hz the spindle marks 6000 rpm as the maximum speed, if you put 60hz the spindle reaches 24000 rpm

The P0023 you have a choice as to what you want and how to use it ( it is a % setting ) it has nothing to do with the main frequency

[Cosimino71]

The P0023 you have a choice as to what you want and how to use it ( it is a % setting ) it has nothing to do with the main frequency

Hello as I am new in this forum and I would like to understand my cnc machine well I followed the discussion regarding the vision of the spindle speed and I set those parameters to be able to see it the main parameters are on 400hz but I notice that the spindle heats up after 15 minutes even if I take it over six thousand turns my spindle and the one in the attached photo and I have a YL620-A vfd

[Wiseman1]

I know this is an old thread, but in case someone else is searching for this. To show rpm on your inverter you have to set P00.24 to 9 and P00.23 to 60%. That will show your speed as (at 400Hz) 'u2400'. Or if you set to 6% is will say 'u 240'.
Yes, it doesn't show the 24000 rpm but it is better than nothing!

[mactec54]

I know this is an old thread, but in case someone else is searching for this. To show rpm on your inverter you have to set P00.24 to 9 and P00.23 to 60%. That will show your speed as (at 400Hz) 'u2400'. Or if you set to 6% is will say 'u 240'.
Yes, it doesn't show the 24000 rpm but it is better than nothing!

Thats good information but you have to say what make and model number VFD Drive this is for, they are all different.

[armandorag]

I know this is an old thread, but in case someone else is searching for this. To show rpm on your inverter you have to set P00.24 to 9 and P00.23 to 60%. That will show your speed as (at 400Hz) 'u2400'. Or if you set to 6% is will say 'u 240'.
Yes, it doesn't show the 24000 rpm but it is better than nothing!

Thanks, that worked