ETA: I found the solution right under my nose, with Mid-Auto/Manual. Hadn't beed using this feature previously due to various reasons, but my issue is solved.


Hello all.

I am having some difficulty working through the issue of completing a manual tool change (to remove an oversize tool ffrom spindle) in the middle of a program and resuming the program from that point.

The machine is a Genos M560-V vertical mill with an OSP-300m controller. When I toggle into manual mode to remove the tool from the spindle, and back into auto mode, the program resets to the beginning.

Am I missing something simple here?


Thanks

crays