509,873 active members
3,994 visitors online
Register for free
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > MILLING > Huron universal head style Angle charts
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2006

    Huron universal head style Angle charts

    Hello everyone I have a CME FS2 with a Huron universal style head .
    I’ve worked Huron’s for years and know how to set the head to machine along the x axis .
    But when u set the angle to the chart in the manual it is nothing like it should be .
    Does anyone have a Huron table for setting the head ?
    Or can point me as to where I’m going wrong .

    I’ve tried the calculator advertised everywhere but it won’t run . Says need internet connection, that it has so can’t go any further

    Thanks in advance Chris

  2. #2
    Join Date
    May 2013
    The italian machines usually have a vernier scale, a strip of thin alloy scriveted into the casting.usually 4cm x 1cm, has decimal degrees, maybe your chart has degree minute seconds and is causing confusion?
    Wisdom results from foolishness!

Similar Threads

  1. Huron head milling machine angle calculator
    By vvraiyani in forum General Other Machine Discussion
    Replies: 0
    Last Post: 10-04-2018, 03:13 PM
  2. Bridgeport style right angle drive
    By Sp-4renegade in forum Tormach Personal CNC Mill
    Replies: 6
    Last Post: 11-11-2014, 02:48 AM
  3. Universal Joint - max angle before binding?
    By nadsab in forum Mechanical Calculations/Engineering Design
    Replies: 2
    Last Post: 02-22-2012, 05:20 PM
  4. Deckel FP3 universal head
    By axon in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 11-09-2011, 09:42 PM
  5. Universal Head Settings
    By David101 in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 08-28-2008, 10:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts