509,979 active members
3,382 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Spindles / VFD > Huanyang Inverter + Next Wave Automation CNC
Results 1 to 5 of 5
  1. #1

    Join Date
    Oct 2019
    Posts
    3

    Huanyang Inverter + Next Wave Automation CNC

    O.k., I've got a 2.2 Kw inverter and a Piranha XL controller, is there any way to enable spindle on/off ?
    I am not afraid to open the case of the controller, nor am I afraid to do some soldering, if I have to.
    Any help would be GREATLY appreciated.

  2. #2
    Member
    Join Date
    Jan 2005
    Posts
    10553

    Re: Huanyang Inverter + Next Wave Automation CNC

    Quote Originally Posted by madmaxh3 View Post
    O.k., I've got a 2.2 Kw inverter and a Piranha XL controller, is there any way to enable spindle on/off ?
    I am not afraid to open the case of the controller, nor am I afraid to do some soldering, if I have to.
    Any help would be GREATLY appreciated.

    After looking up what you have contact the manufacture
    Mactec54

  3. #3

    Join Date
    Oct 2019
    Posts
    3

    Re: Huanyang Inverter + Next Wave Automation CNC

    mactec54,

    I believe I know the correct parameters for the VFD. Attached are three photos of the BOB (not pro quality, sorry).
    Attached Thumbnails Attached Thumbnails image3.jpeg   image4.jpeg   image5.jpeg  

  4. #4
    Member
    Join Date
    Jan 2005
    Posts
    10553

    Re: Huanyang Inverter + Next Wave Automation CNC

    Quote Originally Posted by madmaxh3 View Post
    mactec54,

    I believe I know the correct parameters for the VFD. Attached are three photos of the BOB (not pro quality, sorry).
    The next wave I believe is a bad idea, you need a Relay to switch FOR and DCM on the VFD Drive if the Next wave has a spare output that could turn a Relay On /Off that is all you need I don't see a Relay on there Board

    It's just a switch with no voltage on the Relay output
    Mactec54

  5. #5

    Join Date
    Oct 2019
    Posts
    3

    Re: Huanyang Inverter + Next Wave Automation CNC

    Thanks mactec54,
    I think I have a relay that will work, I'll check it out.

Similar Threads

  1. huanyang inverter HY020223B 3hp 2.2kw
    By holder1944 in forum Phase Converters
    Replies: 0
    Last Post: 07-17-2013, 03:14 PM
  2. 220V in to Huanyang Inverter
    By Jerry In Maine in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 04-13-2013, 01:43 AM
  3. Huanyang Inverter Problem
    By icanoe in forum Community Club House
    Replies: 0
    Last Post: 03-15-2013, 01:35 PM
  4. huanyang inverter burn
    By edgas10 in forum General CNC Machine Related Electronics
    Replies: 5
    Last Post: 07-02-2012, 06:42 PM
  5. Huanyang inverter
    By mdileva in forum Phase Converters
    Replies: 2
    Last Post: 06-18-2012, 03:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •