508,433 active members
3,780 visitors online
Register for free
Login
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Sep 2019
    Posts
    3

    Need some guidance

    I have a Mitsubishi ML4020RX-F60 Fiber Laser Cutter and I have an issue that I cannot seem to figure out. To start with I am not really sure what the problem is but I have done everything I know to do to try and fix the issue, but no luck. This seems to really only be an issue when cutting stock 3/8" and thicker. The laser seems to cut just fine in 3 of the 4 directions but on one side the cut will be concave and will have slag stuck to the bottom of the sheet and part. I am attaching some photos of what I am seeing. I would really appreciate any help.
    Attached Thumbnails Attached Thumbnails pic 1.JPG   pic 2.JPG   pic 3.jpg   pic 4 (1).jpg   pic 5.jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •