I am trying to set up FTP file transfer from PC to a YCM NXV1025 Fanuc MXP-200FA (which should be a 0i-MF). I followed instructions on manual and setup the FTP Host on the CNC and linked it to the PC FTP server. I am able to view the files on the FTP server from the CNC. However, when "EXEC" "F INPUT" of a specific files from the FTP Host to my CNC MEM, I got an Alarm message SR2035 Sequence error blah blah. Sometimes an alarm SR2032 embedded Ethernet...

Any advise or suggestions are very much appreciated. Thank you.