584,857 active members*
4,728 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > machine all the time in rmt mode
Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    Oct 2019
    Posts
    1

    machine all the time in rmt mode

    hello

    just like the subject, the machine is still in rmt mode
    the machine is a milling machine SMC8650 with fanuc Oi MF software
    despite turning the potentiometer to other modes (e.g. edit) the machine is still in rmt mode
    What should you do to make the machine go into other modes?
    in addition, nothing can be turned on from the operator panel, e.g. coolant or block-by-block mode
    after resetting the PLC ladder and switching to manual activation, the machine goes into a different mode with a potentiometer but nothing else

  2. #2
    Join Date
    Oct 2019
    Posts
    17

    Re: machine all the time in rmt mode

    This requires way more information than you have provided.

    When did this start happening?

    Are you able to bring the machine out of E-Stop?

    What do you mean "nothing can be turned on" from the op panel?

    What do you mean you "reset" the ladder?

    As someone who troubleshoots machinery for a living, I can tell you that you gave very little information.

  3. #3
    Quote Originally Posted by Danielos91 View Post
    hello

    just like the subject, the machine is still in rmt mode
    the machine is a milling machine SMC8650 with fanuc Oi MF software
    despite turning the potentiometer to other modes (e.g. edit) the machine is still in rmt mode
    What should you do to make the machine go into other modes?
    in addition, nothing can be turned on from the operator panel, e.g. coolant or block-by-block mode
    after resetting the PLC ladder and switching to manual activation, the machine goes into a different mode with a potentiometer but nothing else
    I have a Takisawa TS-25 with 15TF control. IT has akeep relay setting that selects between tape/rmt and local/memory mode. Not sure of this is The case for you, but might help.

  4. #4
    Join Date
    Mar 2017
    Posts
    314

    Re: machine all the time in rmt mode

    resetting the PLC ladder?

    An 0i-MF (the current model) would not have Tape/Rmt mode
    After a bit of research I think you are in the wrong sub-forum
    Just because chairman Mao put a Fanuc sticker on it doesnt make it a Fanuc

    I think this is what you have. But who knows.
    GSKCNC.com GSK CNC Equipment CNC Machine AC Servo Motor Servo Drive CNC Controller CNC Milling CNC Lathe Turning OEM Stepping system Ball Screw Power American Chinese made China

  5. #5
    Join Date
    Dec 2009
    Posts
    947

    Re: machine all the time in rmt mode

    can you upload the ladder so we can open it and search for your problem?

  6. #6
    Join Date
    Apr 2020
    Posts
    5

    Re: machine all the time in rmt mode

    Hi
    Do you solve your problem? My also CNC Milling machine, system also Fanuc 0i mf. I just install. I can not use. What happened, I don’t know? Can anybody help?

  7. #7
    Join Date
    Nov 2022
    Posts
    2
    I do have the same problem with the same machine Please help ????.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •