508,402 active members
2,678 visitors online
Register for free
Login
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > MILLING > machine all the time in rmt mode
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Oct 2019
    Posts
    1

    machine all the time in rmt mode

    hello

    just like the subject, the machine is still in rmt mode
    the machine is a milling machine SMC8650 with fanuc Oi MF software
    despite turning the potentiometer to other modes (e.g. edit) the machine is still in rmt mode
    What should you do to make the machine go into other modes?
    in addition, nothing can be turned on from the operator panel, e.g. coolant or block-by-block mode
    after resetting the PLC ladder and switching to manual activation, the machine goes into a different mode with a potentiometer but nothing else

  2. #2

    Re: machine all the time in rmt mode

    This requires way more information than you have provided.

    When did this start happening?

    Are you able to bring the machine out of E-Stop?

    What do you mean "nothing can be turned on" from the op panel?

    What do you mean you "reset" the ladder?

    As someone who troubleshoots machinery for a living, I can tell you that you gave very little information.

  3. #3
    Quote Originally Posted by Danielos91 View Post
    hello

    just like the subject, the machine is still in rmt mode
    the machine is a milling machine SMC8650 with fanuc Oi MF software
    despite turning the potentiometer to other modes (e.g. edit) the machine is still in rmt mode
    What should you do to make the machine go into other modes?
    in addition, nothing can be turned on from the operator panel, e.g. coolant or block-by-block mode
    after resetting the PLC ladder and switching to manual activation, the machine goes into a different mode with a potentiometer but nothing else
    I have a Takisawa TS-25 with 15TF control. IT has akeep relay setting that selects between tape/rmt and local/memory mode. Not sure of this is The case for you, but might help.

  4. #4
    Registered
    Join Date
    Mar 2017
    Posts
    289

    Re: machine all the time in rmt mode

    resetting the PLC ladder?

    An 0i-MF (the current model) would not have Tape/Rmt mode
    After a bit of research I think you are in the wrong sub-forum
    Just because chairman Mao put a Fanuc sticker on it doesnt make it a Fanuc

    I think this is what you have. But who knows.
    GSKCNC.com GSK CNC Equipment CNC Machine AC Servo Motor Servo Drive CNC Controller CNC Milling CNC Lathe Turning OEM Stepping system Ball Screw Power American Chinese made China

  5. #5
    Registered
    Join Date
    Dec 2009
    Posts
    566

    Re: machine all the time in rmt mode

    can you upload the ladder so we can open it and search for your problem?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •