Our shop has been working with Enroute 4.1 and Mach3 for years. We recently had a hard drive fail. Luckily we had a backup of mach3 setting and we have full function (including spindle) via Mach3. However the settings for the EnRoute 4 were lost. My question is can Enroute 4 automatically include a spindle-start command in the .tap file generated. At the moment, we are having to start the spindle manually in Mach3 first then running the EnRoute 4 file without a problem. Interestingly, the spindle does stop once the job file completes. Is there a setting we are missing in EnRoute 4?