[S.Kontogiannis]

Version 2.04 will be out in about a couple of weeks. The major improvement over the last version is the inch mode -it has been redisigned and the old problems (small deviations in the data) have been eliminated. Version 2.04 is currently in the debug state.

[S.Kontogiannis]

At last the new version is out and can be downloaded at http://www.gsimple.eu

The installation method has been changed completely and there is also a new users manual which is (almost) complete.

[MarkIVAuto]

Hello to any g-simple users. I am looking to see if anyone has set up g-simple with a bridgeport set with sx15. I am looking for a config file or how to set up the config file for a bridgeport. Thank you in advance.

[delta33]

When will there be another update?
I still use 2.03 the later ones had problems in INCH mode.

[Rubeno]

Hi Sotiris: I am learning how to use your program and I have to say it is great. Congratulations!!! Gsimple works very well creating the g-code in my pieces. I will try to cut some of them soon. I will be reporting my adventure. Thanks a lot!!!!

[Stubby1]

When I go to make the g code I come up with the error of: No engraving tool present for text ID 2. I have added the tools under the Tools tab and in the setup and still come up with the same error. Is there a tutorial that expands about engraving and the setup?

[Doggitter]

Can I not snap to an object to select line ends? Snap is on, all selections in snap options are turned on. I would think selecting LINE would allow a "pick" feature or something other than coordinates. Coordinates will be awful slow, error ridden drawing methods.

[Doggitter]

oops.

[TheJollyMiller]

I would just like to say that Gsimple is a brilliant programme and that it has helped me enormously in coming to terms with G-Code.

I have used it to make quite complicated parts and once you have found all the wrinkles it is a very powerful tool.

I use it to produce G-Code for my Denford Novamill that is running on Mach3.

[TheJollyMiller]

OOPS!

Double post. So I will give you a picture. ;-)

[keith20mm]

S.Kontogiannis,

Where has the gsimple download been moved to? The stated URL does not download.

[Lee Evans]

S.Kontogiannis,

Where has the gsimple download been moved to? The stated URL does not download.

Yes I was wondering thos as well I would like to use this program does anyone have a link where I could download it?