Got one of these coming for super cheap ($739 shipped) and cannot find much detail from community. The manufacturer has a website with specs:
https://www.bestechmachine.com/product/BT16V-Mini-Table-Bench-Drilling-Milling-Machine.html
But I have seen several numbers displayed for X and Y travel along with weight, belt or gear driven. It appears to be similar to a G0704 head without the 90 degree gear for Z axis handle and smaller bed. I assume the column, Z slide, bed, saddle and base are all unique to the BT16 making up the ~100lb difference.
I have a photo of the exact machine they are sending and it appears to have a high/low selection on side of the head so its likely not a belt setup. The puzzling part is the manufacturer has a video with the same high/low selector and oil inspection window(mine didnt appear to have one) yet they claim its belt. Perhaps belt driven to a shaft with high/low or are they mixing up models shown? The video:
https://youtu.be/S1j1x24is9s
I am hoping at least the travels are right as I have some linear scales coming in 350mm and 200mm which is 40mm longer then avertised 160mm but I believe an extension plate sticking past base will not look too terrible.
I'll update this thread with answers to a lot of these questions once the machine arrives.