Re: Okuma Millac 800VH - 15818 "APC A position not complete".
hi, far as i see, you can't reach the home, and there was an error about over stroke; this happens when the encoder slips, there is be a friction part, but also there may be other causes ... i would verify that the phisical travels and origins are where they should be, and after that the alignment, in respect to apc & atc
what axis caused the over stroke, and why ? kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg