584,841 active members*
4,316 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > OKUMA OPS Control Force I.O
Results 1 to 7 of 7
  1. #1
    Join Date
    May 2017
    Posts
    6

    OKUMA OPS Control Force I.O

    Can any one help me to show How can I turn on the function for force l input and output signal for OSP control ?

    I read the manual book. To force the signal the OSP control should be change to Adjustment mode. But I do not know how to change to adjustment mode.

    I notice the have a function for " Change PLC Mode ", this need a password? Did PLC for OSP control have any default password ?

    Thank you.

  2. #2
    Join Date
    Jun 2015
    Posts
    4131

    Re: OKUMA OPS Control Force I.O

    hy honghaivib, pls check attached for osp300; watch in order 01 02 03 04 and 05; don't forget to cycle the power ( off and back on ) after 03

    if i may, what signal do you wish to mix-in-the-mix, and why ?

    1st time when i read the title of your post, i believed that you wish to control the torque limit, thus the output force : somehow, that's also possible kindly

    ps : sorry 4 the delay, i was dirty ...
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  3. #3
    Join Date
    May 2017
    Posts
    6

    Re: OKUMA OPS Control Force I.O

    Thank you DeadlyKitten !

    So the password I can use is : CHGCOND? It can apply for all machine with OSP control?

    my factory have a lot of Okuma machine with OSP control. Some time I would like to turn on or off some input or output for troubleshooting. Example I turn on the signal to the valve to test the valve working or not.

  4. #4
    Join Date
    Jun 2015
    Posts
    4131

    Re: OKUMA OPS Control Force I.O

    It can apply for all machine with OSP control?
    i don't know many things ... give it a try

    Example I turn on the signal to the valve to test the valve working or not.
    please, if i may, what are you controling with those valves ? kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  5. #5
    Join Date
    May 2017
    Posts
    6

    Re: OKUMA OPS Control Force I.O

    Thank Deadlykitten !

    I already test the cnc okuma machine with the password you gave me. I work for type of OSP control in my factory.
    Some time I test the coolant pump, some time I test hydraulic valve for chuck clamp and unclamp....

    Do you know how to force input and output signal of CNC machine with Sinumerik control ? It need password too

  6. #6
    Join Date
    Jun 2015
    Posts
    4131

    Re: OKUMA OPS Control Force I.O

    hy, i thought that you have extra-valves, controlling some custom automation; so far i had no problems with the default valves

    no clue about sinumerik ... try to contact the dealer ? sinumerik forum ? or be a hacker / kindly

    ps : use the force, honghaivib !
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  7. #7

    Re: OKUMA OPS Control Force I.O

    So the password is CHGCOND? Does this apply to Okuma OSP-100 and 200 systems?

Similar Threads

  1. Okuma LU300 OSP-E100L Force I/O
    By MidlandMachine in forum Complaints and Praise Discussions
    Replies: 0
    Last Post: 02-08-2019, 02:55 PM
  2. HELP With Okuma 5020L Control
    By pacetool in forum Okuma
    Replies: 1
    Last Post: 08-07-2015, 01:23 AM
  3. Actuator force control
    By dmorton in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 07-12-2011, 12:58 AM
  4. Okuma OSP 2200 Control
    By cnccontrols in forum Okuma
    Replies: 3
    Last Post: 01-28-2009, 12:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •