508,520 active members
2,701 visitors online
Register for free
Login
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > EDM > Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.
Results 1 to 1 of 1
  1. #1

    Join Date
    Oct 2019
    Posts
    1

    Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.

    Hi guys, firstly sorry for my really average english but here is my problem. My boss has to buy a Fx-10 and the machine does not detect its wire just before the wire chopper during an M20 or when e do it manually (wire collect). I have two wire behind the machine that is not plugged in, one that I put behind ceramic aspirator and the other is my problem ... Where? If anyone can help me this would be really appreciated. Thanks in advance.
    Attached Thumbnails Attached Thumbnails 20191029_101908.jpg  

Similar Threads

  1. 1997 Mitsubishi FX20 Wire EDM Load Disks
    By Armando2442 in forum General EDM Discussion
    Replies: 5
    Last Post: 07-11-2016, 08:25 PM
  2. Mitsubishi wire type setting for zinc coated wire
    By Futurewire in forum General EDM Discussion
    Replies: 1
    Last Post: 01-26-2011, 10:47 AM
  3. Mitsubishi wire type setting for zinc coated wire
    By Futurewire in forum General EDM Discussion
    Replies: 2
    Last Post: 01-25-2011, 01:49 PM
  4. Mitsubishi DWC-110H A Wire EDM Floppy Problem
    By tjurek in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 5
    Last Post: 10-11-2007, 01:08 PM
  5. Mitsubishi H110 Wedm Wire Problem
    By osomaker in forum General Waterjet
    Replies: 1
    Last Post: 12-11-2006, 07:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •