Hi,
I am using PlanetCNC for a while now and I am pretty satisfied. Until now I generated the g-code in another CAM Software and used PlanetCNC only for machining.
Now I wanted to use the import functions for SVG, DXF or Image - but they simply dont work.
I am doing the following:
File -> Import SVG -> Select SVG (from local Filesystem) -> do not change any Settings -> OK.
There is no Gcode generated, nothing happens.
I tried changing different Settings on Import - no Luck.
I tried different Imports (DXF, Image) - the same.
I tried a SVG from a PlanetCNC Howto to be sure the SVG is OK. Same.
No errors in the Log.
Attached a few screenshots
I am using PlanetCNC 2023-06-20 on Ubuntu 23.04. Does anyone know this issue?
best regards,
Florian