[emagray]

These parts are going to be used as tools to hold parts in a vice, so any mild steel will suffice. All tolerances are +/-.005 except for the outermost 4.000 and 2.000 dimensions, those are +.25/-0.

I only need one of each part and I am on a tight budget and time-line so this job would probably be best for a home machinist or small business that can get these parts to me in a week or less for a reasonable price.

Thank You,
-Eric

[emagray]

Forgot to post my email address:

[email protected]

[emagray]

I'd also like to add that the inside corners DON'T have to be squared, a radius is allowed. I realize it is easier to machine this way, I just completely forgot to draw that in there.

[jolafson]

PM sent!