hello everyone,
new in this forum and new to build my own cnc.
i own one router table machine ( actually this is my second one, my first was a Chinese 6040 to learn )and i am searching to convert my mill ( pm30 style ) to cnc. if i am in the wrong section please forgive me and i will move the post to a different thread.
So as i say before i am searching to convert my mill to a cnc and i am researching for motors drivers etc etc, i have some limitations as it comes to were i am ( greece ) and as it comes to European shops. my current machine runs with a g540 board and i dont have any problems at all. it runs daily from 5 to 8 uhrs with no problem at all for like 2 years. i have come across some close loop steppers ( china ) with the drivers nemma 34, and the price was is tempting , but if i go this way i am missing a board and i dont have a clue what board to search for. i forgot to mention that i run mach 3 and i will like to continue do so cuz i like it and i dont want to learn a new one.
Thank you all in advance.