584,812 active members*
5,395 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Avenger 200C fault and some strange things...
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2019
    Posts
    1

    Avenger 200C fault and some strange things...

    Hi all,
    I bought a Cincinnati Milacron Avenger 200C lathe, with (strange) part cather option, but without any manuals... It have some trouble...
    1. On booting all tests are passed and "Host control initialize" is flashing. After a few turn off, or reset the machine is wake up.
    2. When the machine is wake up, there have 2 fault message: W-AXIS circuit fault, Alarm number 00453. When i push the alert reset/data reset, after Alert number is: 19099.

    My questions:
    1. Where can i get manuals?
    2. How can i solve that problems?

    The controller is Acramatic 850SX, the servos are Siemens 6SN611.
    I did change the drives and motors already and the fault message is same.

    Thank You and sorry for my poor english.

  2. #2
    Join Date
    Jul 2009
    Posts
    8
    dear mm440

    Did you find the cause of the problem?
    I'm having the same problem. please help me.

    I am having trouble for turning the cincinnati Acramatic 850sx control panel.
    my motor drive is siemens.
    SUMP off
    DIMP off
    GMEM red
    DAMP red
    RUN yellow
    OSA red
    MMC red
    SERV off
    PCA red
    DPWR green
    APWR green

    Display SYSTEM START-UP HOST CONTROL INITIALIZING
    then there is no movement. waiting for help for this problem. thank you
    Click image for larger version. 

Name:	board_led.jpg 
Views:	4 
Size:	86.9 KB 
ID:	433459
    Click image for larger version. 

Name:	display.jpg 
Views:	2 
Size:	100.3 KB 
ID:	433461

Similar Threads

  1. G540 always in fault - red LEDS - strange voltages
    By GTFreeFlyer in forum Gecko Drives
    Replies: 23
    Last Post: 12-24-2013, 04:54 AM
  2. SLAmstepper doing strange things....
    By racedirector in forum Open Source Controller Boards
    Replies: 7
    Last Post: 10-08-2012, 11:34 PM
  3. Strange things happening here in Maine!!!!
    By Barefootboy4 in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 01-27-2011, 12:01 AM
  4. puma 200c Qsetter
    By alllen in forum Daewoo/Doosan
    Replies: 1
    Last Post: 01-03-2008, 10:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •