584,814 active members*
5,382 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2005
    Posts
    116

    M codes not working

    I have written a simple move program in note pad with the M30 command at the end.
    Saved it as a *.tap file .
    I load the program into Mach3 it comes up on the screen without the M30 command.
    I go back and edit the program and find the M30 command as the last line of the program.
    I run the program and it does not automatically rewind.
    Am I missing something in the setup of Mach?

  2. #2
    Join Date
    Oct 2005
    Posts
    1145

    Re: M codes not working

    Add an empty line AFTER teh M30 or a % .

    (;-) TP

  3. #3
    Join Date
    Jan 2005
    Posts
    15362

    Re: M codes not working

    Quote Originally Posted by johnd View Post
    I have written a simple move program in note pad with the M30 command at the end.
    Saved it as a *.tap file .
    I load the program into Mach3 it comes up on the screen without the M30 command.
    I go back and edit the program and find the M30 command as the last line of the program.
    I run the program and it does not automatically rewind.
    Am I missing something in the setup of Mach?
    As vmax549 has said add a % at the bottom and top of your program
    Mactec54

  4. #4
    Join Date
    Feb 2005
    Posts
    116

    Re: M codes not working

    Thank you

Similar Threads

  1. G codes and M codes for Mazak Quick Turn T-2
    By sauli in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 05-23-2011, 05:22 PM
  2. Need Help - Programs working for Years they all get error codes
    By richlandrick in forum Mach Software (ArtSoft software)
    Replies: 10
    Last Post: 05-27-2010, 04:07 AM
  3. Need full list of G CODES AND M CODES FOR FANUC 21I
    By SonnyTees.com in forum G-Code Programing
    Replies: 3
    Last Post: 02-23-2010, 05:27 PM
  4. Replies: 3
    Last Post: 12-08-2009, 02:28 AM
  5. M-codes and G-codes 4 Matsuura ES-1000V
    By maximusek in forum G-Code Programing
    Replies: 2
    Last Post: 11-27-2007, 01:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •