Hi,
We have a Daewoo PUMA 6-s serial #0593 with Fanuc O-T the machine has been shut down for 3-4 years and when we tried to hook it back up it turns out that the power and mainboard was fried. We have changed mainboard, power, I/O, memory and axis cards and successfully booted up again
We are now facing to add all parameters to get the machine up and running and by that we need some help
our specs:
All Fanuc parts:
Mainboard: A02B-0098-B511
Mainboard power: A16B-1212-0950
Graphic: A16B-2201-0350/07A
Memory: A16B-2201-0101/07A
I/O: A16B-1211-0970/01A
Axis: A16B-2200-0391
X axis Motor: A06B-0128-B177
z axis motor: A06B-0143-B077
Power supply A06B-6087-H115
Spindle amp: A06B-6088-H215
Servo amp: A06B-6+079-H208
Any input to get us back up running in terms of parameters would be greatly apriciated, sorry for any bad English
Regards RTS Norway