[rweaver5302]

Hi -

I'm the proud new owner of an Arrow 500 with the Acramatic 2100 control manufcaured in 2000. I'm still in the process of getting in running.

I'm looking for a copy of the electrical schematics. I have a hard copy of the machine handbook but it doesn't include any of the electrical drawings.

The machine came from the Focus Hope trade school in Detroit MI. Prior to that, I believe it was govement owned based on the property sticker attached.

below is a link to the auction page:

https://www.bidspotter.com/en-us/auc...f-aaf60111e78f


Thanks in advance.

Randy

[email protected]

[tspiszak]

https://www.dropbox.com/sh/y38l30x7n...GNxPMKJya?dl=0

This is for sabre machines.


Sent from my D5803 using Tapatalk

[rweaver5302]

Thank you very much, I appreciate you taking time to share that with, exactly what I was looking for.

[maver1ck]

There were a lot of similarities across the VMCs, but also a lot of differences based on model, vintage, etc.

Best to get the right set of prints for your machine.
The electrical drawing number is on the serial number plate, and you can still buy them directly from Fives-Cincinnati.

[meckardt55]

There were a lot of similarities across the VMCs, but also a lot of differences based on model, vintage, etc.

Best to get the right set of prints for your machine.
The electrical drawing number is on the serial number plate, and you can still buy them directly from Fives-Cincinnati.

You can contact FIVES at 800-934-0735. They will e-mail you the prints for about $250. You need the numbers that maver1ck said.

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services