510,093 active members
2,661 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Getting rid of Cincinnati Milacron T-10 Horizontal
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Nov 2007
    Posts
    32

    Getting rid of Cincinnati Milacron T-10 Horizontal

    We've finally gotten to the point where we're only running our T-10 about a couple times a year and it's now taking up more space then it's worth. We've removed the guarding from the machine in order to run some parts that were too big to fit. This is a two pallet machine with 45 CAT-50 tools. We've upgraded the screen to an LCD. For those who don't know, the T-10 is a 500mm (19.68") pallet machine with travels of X32" / Y26" / Z26" and a 6,000RPM 2-range spindle. This machine has a 1° B-axis. The control is an Acramatic 950.

    No offers (above scrap value) will be refused for parts of the entire machine. I'd really like to see this machine's parts go to someone who can use them instead of the bone yard. Please get in touch if you have any interest.

    We have a bunch of spare parts, manuals, etc.

    The machine is in Farmington, NH,

    If you're interested please give Seneca Machine a call or email.

    603-755-8900

    info @ senecamachine . com



    Thanks,

    Justin

  2. #2
    Junior Member
    Join Date
    Sep 2008
    Posts
    92

    Re: Getting rid of Cincinnati Milacron T-10 Horizontal

    Can you share some pictures of the electric cabinet?

  3. #3

    Re: Getting rid of Cincinnati Milacron T-10 Horizontal

    Quote Originally Posted by Strange179 View Post
    We've finally gotten to the point where we're only running our T-10 about a couple times a year and it's now taking up more space then it's worth. We've removed the guarding from the machine in order to run some parts that were too big to fit. This is a two pallet machine with 45 CAT-50 tools. We've upgraded the screen to an LCD. For those who don't know, the T-10 is a 500mm (19.68") pallet machine with travels of X32" / Y26" / Z26" and a 6,000RPM 2-range spindle. This machine has a 1° B-axis. The control is an Acramatic 950.

    No offers (above scrap value) will be refused for parts of the entire machine. I'd really like to see this machine's parts go to someone who can use them instead of the bone yard. Please get in touch if you have any interest.

    We have a bunch of spare parts, manuals, etc.

    The machine is in Farmington, NH,

    If you're interested please give Seneca Machine a call or email.

    603-755-8900

    info @ senecamachine . com



    Thanks,

    Justin
    Cincinnati machine can be very nice after CNC retrofitting.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

  4. #4
    Registered
    Join Date
    Nov 2007
    Posts
    32

    Re: Getting rid of Cincinnati Milacron T-10 Horizontal

    Sorry this has taken me a few days. I have taken some pictures of the cabinets and uploaded them to Dropbox. Here's the link. If you have any questions or want more specific pictures, I can accommodate.

    https://www.dropbox.com/sh/6l275s2uz...S_dssa3Ka?dl=0

    We did have this machine laser and ballbar checked some years ago. The end result was the ballscrews were very accurate but the servos probably needed some tuning to get better roundness on contouring. Since then the machine has had very little use, maybe... a couple hundred hours runtime, max.

    The spindle drive was sent to Siemens a couple years ago for a rebuild. (one of the few times we needed to run the machine, it decided it didn't want to) It came back extremely clean and works well.

    The old MFM/RLL Hard drive was replaced with a conversion board to IDE and a compact flash card.

    We have a LOT of spare parts for this machine and a full set of documentation, with some duplicate books.

    Justin

Similar Threads

  1. Cincinnati milacron VST 85
    By Redzilla in forum Plastic injection
    Replies: 1
    Last Post: 03-06-2017, 08:27 PM
  2. Cincinnati Milacron CU 20
    By cu20 in forum Cincinnati CNC
    Replies: 1
    Last Post: 02-21-2014, 08:00 PM
  3. Z-axis resolver issue on Cincinnati Milacron Horizontal Mill
    By patty sanders in forum Cincinnati CNC
    Replies: 2
    Last Post: 01-06-2011, 03:52 PM
  4. Cincinnati Milacron 5VC-750
    By akrmarine in forum Cincinnati CNC
    Replies: 0
    Last Post: 03-22-2010, 02:23 AM
  5. Looking for tool holders for Cincinnati Milacron Horizontal Mill
    By HeavyJBXC in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 07-17-2007, 05:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •