584,863 active members*
4,854 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 11 can't execute FIN signal
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    May 2008
    Posts
    107

    Fanuc 11 can't execute FIN signal

    Dear all.
    My Makino machine( with Fanuc 11M controller) was can not finish the command I entered from MDI such as M9;( EOB was included), even when the DGN 409.2(FIN signal, because this machine used 3M interface) was come to 1. Please guide me how to fix this problem. Thanks a lot.
    Nam.

  2. #2
    Join Date
    Apr 2012
    Posts
    85

    Re: Fanuc 11 can't execute FIN signal

    Is the control trying "In-Position" check? Flashing @ symbol on the bottom of the screen? Is DEN signal on in DGN 1000?
    You didn't mention what model. Horizontal? Vertical?

Similar Threads

  1. End of Bar signal read on Fanuc 21i
    By isousa in forum Fanuc
    Replies: 4
    Last Post: 09-08-2012, 11:04 PM
  2. Fanuc 15M skip signal
    By 67highboy in forum Fanuc
    Replies: 2
    Last Post: 09-11-2008, 04:13 PM
  3. How to execute a cnc program without logging to the execute mode of the graphical use
    By sabreen in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-04-2008, 12:29 PM
  4. Help with FANUC O-MD and index signal (M21)
    By Sump Cleaner in forum Fanuc
    Replies: 3
    Last Post: 12-27-2005, 08:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •