Hi All,
I've just started working on Xilog Plus using a CNC router at work and am having an issue where I will specify the tool (specifically "1" or "E1") and will get an error message saying I must specify a positive value for the R field. The R field defaults to a value of "1" and I am not sure what it should be. I assume my issue is in the first few lines of my code as I am trying to convert the G-Code from Fusion 360's CAM software. I have posted the first few lines bellow. Any assistance would be greatly appreciated.
H DX=1200 DY=600 DZ=38 -A *MM /DEF
; Stock bottom test
; Creating stock with stock setup
; T1 D=10 CR=0 - ZMIN=-19 - flat end mill
XPL X=0 Y=0 Z=0 Q=0. R=0.
XG0 X=-1075.229 Y=495.131 Z=15 T=1 S=1750
XG0 T=1 S=1750
XG0 Z=5 T=1 S=1750
XG0 Z=2.5 T=1 S=1750
XL2P X=-1074.973 Y=495.041 Z=2.491 V=350
XL2P X=-1074.712 Y=494.966 Z=2.481
XL2P X=-1074.448 Y=494.906 Z=2.472
XL2P X=-1074.18 Y=494.862 Z=2.462
XL2P X=-1073.91 Y=494.832 Z=2.453
XL2P X=-1073.639 Y=494.819 Z=2.443