Hello
I have this module then I use it to manage the speed of my pin?
https://fr.aliexpress.com/item/33021...2b836c37jxWM3G
I connected it I have the same tension.
In the parameters what frequencies should I indicate for the PWN "Value of PWM base frequency"
Thread: Module pwm
Results 1 to 3 of 3
-
11-15-2019, 07:21 PM #1
- Join Date
- Oct 2019
- Posts
- 11
Module pwm
-
11-16-2019, 12:30 AM #2
Moderator
- Join Date
- Mar 2017
- Posts
- 1304
Most VFDs have an option to have speed frequency controlled and don't need 0-10v device.
-
11-16-2019, 12:43 AM #3
- Join Date
- Oct 2019
- Posts
- 11
Re: Module pwm
Thank you for responding so quickly but the problem was that I was in simulation mode …
Here is my VFD I do not know if it has this input what would arrange me because my modul do not want to give the 10V it stops at 8.6v a defect I think.
https://www.se.com/ch/fr/product/ATV...h---radiateur/
Thank you again for your valuable help
Reply With QuoteSimilar Threads
-
CDM Module new parts
By HotAndCold in forum AlphacamReplies: 1Last Post: 03-21-2018, 08:19 PM -
Interface module on 11M
By jorber in forum FanucReplies: 1Last Post: 04-16-2012, 10:05 PM -
if you need ic and module,please tell me.
By keithshen in forum Want To Buy...Need help!Replies: 0Last Post: 01-07-2008, 02:07 PM -
Is anyone using the Lathe Module?
By clevang in forum BobCad-CamReplies: 0Last Post: 12-11-2007, 07:07 PM -
Please need help on I/O Module
By yeager in forum CNC Machine Related ElectronicsReplies: 9Last Post: 01-13-2006, 03:19 PM
Tags for this Thread
Posting Permissions
