Can someone explain to me why my CNC machine always taking a dive when carving or drilling? I have a Stepcraft D840 ATC. Every time I carve or drill somewhere in the process the bit just take a dive and mess up my whole work piece. The machine is leveled runs smooth ATC works ok. The preview of the toolpath look good, but I just can't stop it from going scuba diving without water.[ATTACH=CONFIG]439227[/ATTACH]
Here is a video on my YouTube channel.
https://youtu.be/21WOAp7HfxI
Thread: Drilling and Carving Issues
Results 1 to 2 of 2
-
03-28-2020, 08:16 AM #1
Member
- Join Date
- Mar 2013
- Posts
- 9
Drilling and Carving Issues
-
07-06-2020, 01:18 AM #2
- Join Date
- Jun 2020
- Posts
- 1
Re: Drilling and Carving Issues
Why does it stop moving? Is that the end of the program, or does it throw an error?
Looks odd- is your tool by any chance getting yanked out of the collet?
want to post your G code? I doubt its the issue but its always worth inspecting to make sure its not the problem.
--A
Reply With Quote
Posting Permissions
