585,728 active members*
4,174 visitors online*
Register for free
Login

Thread: Inductive Sensor

Results 1 to 3 of 3
  1. 11-17-2019, 01:39 PM #1
    R2D3
    R2D3 is offline Member
    Join Date
    Oct 2017
    Posts
    40

    Inductive Sensor

    How to use the induction sensor for PlanetCNC? For inputs LIM and INX?
    The sensor does not work like a normal contact, it passes voltage through itself from the power source.
    I am afraid that this voltage will damage the board.( )
    I need a wiring diagram with explanations.
    Reply With Quote Reply With Quote
  2. 11-17-2019, 01:45 PM #2
    tantemay
    tantemay is offline
    Join Date
    Nov 2015
    Posts
    260

    Re: Inductive Sensor

    Ich use this one: https://planet-cnc.com/product/adapt...h-optocoupler/

    or look on Ebay for some cheaper
    Reply With Quote Reply With Quote
  3. 11-17-2019, 05:47 PM #3
    iBigNTastyi
    iBigNTastyi is offline
    Join Date
    Aug 2019
    Posts
    11

    Re: Inductive Sensor

    With different controllers, I've applied 12v directly from power source, and used resistor on signal wire to drop voltage to 5v. I plan to do the same with my PlanetCNC setup.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Inductive Sensor for MH800C NJ2/4-5791-Y22929
    By preimerx5 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 6
    Last Post: 04-19-2023, 07:48 AM
  2. Inductive Proximity Sensor electronics problem, help needed.
    By joel0407 in forum CNC Machine Related Electronics
    Replies: 17
    Last Post: 09-18-2017, 06:17 PM
  3. Inductive Proximity Sensor Limit Switches
    By clembrant in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 01-09-2016, 06:57 AM
  4. Wiring an Inductive Proximity sensor for TB6560. How?
    By Azalin in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 11-11-2015, 09:19 PM
  5. probotix to inductive prox sensor
    By xkadet in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 04-14-2009, 04:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules