584,833 active members*
5,304 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2019
    Posts
    1

    LINUXCNC weird program issue

    I am trying to run a program and when it calls up tool 12 it doesn't seem to do what it's supposed to. The preview on Linuxcnc shows the tool in one spot but the tool is actually in a different spot. i do not have this problem with any other tool paths in the program. When I separate the toolpath into its own program it goes to a different location. The code between the to programs is the same I dont understand why it is doing this any help would be appreciated.
    Attached Files Attached Files

  2. #2
    Join Date
    Mar 2007
    Posts
    89

    Re: LINUXCNC weird program issue

    Did you get this figured out?

Similar Threads

  1. Weird issue
    By FidgetThings in forum Tormach Personal CNC Mill
    Replies: 7
    Last Post: 06-05-2017, 08:19 PM
  2. Weird Mach issue
    By keithmcelhinney in forum Novakon
    Replies: 13
    Last Post: 02-05-2016, 12:40 PM
  3. Weird 4th axis issue. . .
    By brianbonedoc in forum Novakon
    Replies: 5
    Last Post: 02-07-2015, 01:23 AM
  4. Weird issue with NC output
    By ClockMaster in forum FeatureCAM CAD/CAM
    Replies: 5
    Last Post: 12-19-2007, 11:21 PM
  5. Weird stepper issue...
    By WilliamD in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 07-21-2006, 05:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •