hi all,
i have a trouble with G31:
NOT WORK
G31X-20
G31Y-20
WORK FINE
G31X20
G31Y20
G31Z20
G31Z-20
hi all,
i have a trouble with G31:
NOT WORK
G31X-20
G31Y-20
WORK FINE
G31X20
G31Y20
G31Z20
G31Z-20
It does not help that you have provided next to no information about your setup.
Since some G31 instructions do work for you, I don't think the problem is in the Mach SW.
Do you have limits set up?
Cheers
Roger
I am using a uc100 clone from usb to parallel using the mach3usb.dll on WIN10.
Using directly on LPT and windows XP work GCODE G31!
The machine is USB native and inside it has a PIC18F4550 chip the model of the card is a JP-382C.
Is there a firmware for JP-382C with PIC18F4550 to make it work with mach3?
In this way I could eliminate the clone UC100 USB / LPT converter.
I want use the USB interface with windows 10 if possible.
Thanks for your help.
This is the problem:
https://youtu.be/5rdCbcJC9oA
Sorry, can't help with the UC100 side of things. I use an ESS myself.
I do know that there is a problem with many LPT converters. Mach3 under XP uses the LPT port in ways a bit different from a printer, and many adapters cannot handle the extra features needed.
Cheers
Roger
Almost all Chinese controllers have problems with probing.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Ask the manufacturer.
do you still have drivers for chinese uc100
clone ?