584,837 active members*
5,590 visitors online*
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > News Announcements > Conversion from manual Mill to CNC mill wiring instructions.
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2011
    Posts
    1

    Conversion from manual Mill to CNC mill wiring instructions.

    I bought a Kit to convert my manual mill to a CNC mill.

    I have assembled the hardware but the wiring leaves a lot to be desired. It has two separate power supplies. one is a KL-350-48, the second is KL-15-5, (3) 5056 Stepper Drivers and the connection board to the computer. I can figure out the motors. I am wondering if the separate PS is for the Z axis stepper motor.

    Any help would be greatly appreciated.

    dthuff

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Conversion from manual Mill to CNC mill wiring instructions.

    The 5V (KL-15-5) is to power up the board. Don't think the stepper would run well on the 5V PS

    Exactly what kit did you buy?
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Join Date
    Nov 2019
    Posts
    1
    If you send me the kit that you bought I will work you through it. You can call at 832 341 2572 or reach me at [email protected]. com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •