We have several Mazak turning centers with T2, T32 and 640 Fusion control. When we transfer files from the 640 fusion control to GriffoBros data base for some reason the file comes up as undefined and all the numerical values are missing from the programs. Could this be a parameter in the control that needs to be changed? The other controls we have all transfer fine, just the 640 has this problem. I contacted the rep from GriffoBros and they are still looking into this. If anyone has experienced this, I would apppreciate any information you wish to share!
Thanks!!
Results 1 to 2 of 2
-
06-20-2007, 12:35 PM #1
Registered
- Join Date
- Jun 2007
- Posts
- 15
File numerical data missing in GriffoBros
-
06-20-2007, 03:48 PM #2
Registered
- Join Date
- Jun 2007
- Posts
- 15
Here's another twist to this problem!
My sales rep who sold us the GriffoBros cmt software (not from GB) called me and said that if she opens the file in another editor from solutionware, she said all the number data is there!
Reply With QuoteSimilar Threads
-
Data Cut Router
By sraab928 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 02-16-2007, 07:31 PM -
New xyz data point file after decentration
By AWTECH in forum OpenSource SoftwareReplies: 2Last Post: 08-17-2006, 04:19 AM -
Data-Cut Router
By dneisler in forum DIY CNC Router Table MachinesReplies: 2Last Post: 03-17-2005, 08:37 PM -
Operation Data - At Op End
By wjbzone in forum GibbsCAMReplies: 5Last Post: 09-24-2004, 01:30 PM
Posting Permissions
