I am only finding brushless type motors.... And I am looking for brush type servo motors which fit into the range of amps and volts offered by the Geck and similar drives.
Thanks in advance for some pointers!
Lemo
Thread: Brush Type Servo Motor Source?
Results 1 to 3 of 3
-
06-20-2007, 03:04 PM #1
Registered
- Join Date
- Apr 2007
- Posts
- 64
Brush Type Servo Motor Source?
-
06-20-2007, 03:23 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
These have a rear shaft you could attach an encoder to.
http://www.surpluscenter.com/item.as...-2351&catname=CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
06-20-2007, 08:01 PM #3
Registered
- Join Date
- Nov 2005
- Posts
- 256
Reply With Quote
Similar Threads
-
IMS IM1007 and ElectroCraft E643 Servo brush-motor
By per_jonsson in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 05-10-2007, 02:24 PM -
Anyone know where to get this exact type of servo motor?
By SCCoupe in forum DIY CNC Router Table MachinesReplies: 2Last Post: 03-18-2006, 04:58 AM -
Brush Servo Motor Sources?
By bsc52001 in forum DIY CNC Router Table MachinesReplies: 4Last Post: 05-19-2004, 03:40 PM -
Why DC Brush Type Servo Motors?
By beegner in forum Gecko DrivesReplies: 2Last Post: 01-06-2004, 12:51 AM -
DC brush servo controller
By peterklos in forum CNC Machine Related ElectronicsReplies: 3Last Post: 12-05-2003, 06:01 PM
Posting Permissions
