584,837 active members*
5,525 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Aspire > Using Aspire and Cut 3d on the same project
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2019
    Posts
    2

    Using Aspire and Cut 3d on the same project

    Ir I were to rough path and finish in different steps, alternating betweeen Cut3D and Aspire, would it explain why my projects had a displacement? considering both would have the same origin and dimensions marked.

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: Using Aspire and Cut 3d on the same project

    If you are 100% positive that the models are in the same place, then it should work fine. Not sure how you'd know for certain that they were, though.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •