i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
hy 8laster i guess is nice if you have experience with multus & LT's; so far, i have never worked on such machines ...I just touch of in basic position (TD=XXXXXX) and use G52
it seems that he uses G52, like it is shown in his other thread, but i don't know what is missing; all the best
hy, my 1st idea would be to let loose the B axis, and tilt the machine using a forklift ... should worki have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?
i also looked inside the manuals, trying to find some special functions, that maybe will help you, but unfortunately i can't be specific; pls find attached infos about :
... coordinate system selection function
... tool center point function / tool attitude command
... the 3d coordinate conversion function
... tool posture compensation function / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg