[KasMachine]

Im trying to make a 5/8 18 2A Thread. Ive been programing and running haas Lathes and mills the last 8 years and recently switched to a new employer. they have haas mills but only one lathe - Okuma Crown OSP700L.
Im unfamiliar with all of the okuma codes and how they should look. They do not have a manual and i cant find one online. hoping you guys can help me.

This is the Code my software puts out



G71 X0.545 Z-0.43 B60 D0.01 U0 H0.08 L0 F25.4 J18 A360

[rcs60]

THIS IS FROM AN OSP500L THIS SHOULD BE CLOSE TO WHAT YOU HAVE

G71X.354Z-2.100B60D.007U.002H.04J30F1

X= X FINAL DIA.
Z=Z FINAL Z LENGTH
B=CUTTER TIP ANGLE
D= DEPTH OF CUT FIRST PASS IN DIA.
U=FINISH PASS IN DIA.
H=THREAD HEIGHT IN DIA.

IN THIS EXAMPLE
J=THREADS PER INCH
F=1
SO THAT ITS READ AS " F/J" =PITCH OF THREAD
IF NO J WORD IS PROVIDED F WOULD BE THE PITCH OF THE THREAD AS THE CONTROL ASSUMES J=1

L=CHAMFERING DISTANCE
A=TAPPER ANGLE

[KasMachine]

thank you for your help. this cleared up alot of my questions and i was able to make parts

[rcs60]

your welcome