584,798 active members*
4,244 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2006
    Posts
    222

    Doosan 2600Y II

    Hi,

    Machineoosan PUMA 2600Y II -2019
    Fanuc 0i-series

    When driven tools are used there is spindle load meter (s2)
    Blue, yellow, and red area
    I do remember that in blue area you can be all time, in yellow are 15min /60min and in red zone you can just "visit"
    For some reason, in our Doosan max % in meter is 600%
    Can you trust to colors, because yellow area goes approx 500% ?? So its safe to drive over 100% ??

    Attachment 431960

    GB

  2. #2
    Join Date
    Jul 2005
    Posts
    380

    Re: Doosan 2600Y II

    Yes, trust the colors. When I worked there we routinely ran live tools into the yellow for 15 minutes and no problems.

Similar Threads

  1. Doosan 2600y y axis cutter comp question
    By sluggo in forum Daewoo/Doosan
    Replies: 1
    Last Post: 12-20-2017, 04:13 AM
  2. Doosan
    By STARSR20J in forum Okuma
    Replies: 0
    Last Post: 01-27-2017, 03:48 AM
  3. Puma 2600y g17 milling
    By yellerrado in forum Daewoo/Doosan
    Replies: 2
    Last Post: 01-28-2013, 06:27 AM
  4. doosan vtl
    By rags in forum Daewoo/Doosan
    Replies: 7
    Last Post: 06-22-2008, 08:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •