[10001001]

Hello,
Would any one have a schematic for a PAC-SCI 900 series servo drive. Kollmorgen owns this now.
Link to manual http://www.kollmorgen.com/uploadedFi...900_Manual.pdf

When power is applied to the drive, the 7 Segment LED status display is just blank. All three line fuses on the inside test good.

Any advice or information will be deeply appreciated.

Thanks,
Mike

[mike_Kilroy]

No schematics out there but some of us Kollmorgen folks repair these and even have spares or can sell u new....

Sent from my SM-G900V using Tapatalk

[ScotGlover]

Probably a little late, but I just fixed one that seemed "dead" because there was nothing on the 7 segment display. I changed the capacitors in the power supply section, and it works good now.