509,794 active members
4,171 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Bobcad Cam Lathe V32
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Nov 2017
    Posts
    8

    Bobcad Cam Lathe V32

    Hello,

    Running a Cnc wood lathe with a knife cutter. Is it possible for Bobcad Cam to make a single depth profile turning cut ? ( no multiple passes) . If so what would’ve be the best way to preform this operation?

    Thank you.

  2. #2
    Registered
    Join Date
    Jun 2008
    Posts
    1749

    Re: Bobcad Cam Lathe V32

    Yes, however that would have to be a single "Basic Finish" strategy, see image below.



    Hope that helps
    Regards
    Rob
    Attached Thumbnails Attached Thumbnails Lathe Basic Finish Path-2.JPG  

  3. #3
    Registered
    Join Date
    Nov 2017
    Posts
    8

    Re: Bobcad Cam Lathe V32

    Thank you!

Similar Threads

  1. Bobcad v24 lathe
    By skippyfix in forum BobCad-Cam
    Replies: 10
    Last Post: 06-26-2015, 01:20 PM
  2. BobCad-CAM Turn / Lathe
    By magicniner in forum BobCad-Cam
    Replies: 13
    Last Post: 10-11-2014, 11:18 AM
  3. Bobcad V25 lathe post
    By ecope in forum BobCad-Cam
    Replies: 2
    Last Post: 12-05-2013, 05:41 PM
  4. Bobcad Lathe V24
    By Badoxygen in forum BobCad-Cam
    Replies: 2
    Last Post: 10-18-2011, 08:40 PM
  5. Bobcad cam lathe
    By Pete ward in forum BobCad-Cam
    Replies: 17
    Last Post: 03-08-2010, 11:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •