this is a good example of a diagram from a book, edit the unwanted sections and print it
and trace out the image using logic trace 2018 and then show cutting it out on the co2 laser
Thread: trace a diagram from a book
Results 1 to 1 of 1
-
12-01-2019, 05:29 PM #1
Member
- Join Date
- Oct 2007
- Posts
- 1019
trace a diagram from a book
Reply With QuoteSimilar Threads
-
DECKEL FP3 A electical book/diagram
By Norby009 in forum Deckel, Maho, Aciera, Abene MillsReplies: 4Last Post: 03-20-2021, 11:06 PM -
intarsia diagram and traced it using logic trace 2018
By woodman08 in forum Logic Trace CNC/DXFReplies: 0Last Post: 09-01-2019, 01:59 AM -
Using The 3 Jumbo Board Setup to trace a large full sized diagram
By woodman08 in forum Logic Trace CNC/DXFReplies: 0Last Post: 02-10-2019, 08:26 PM -
using the high accuracy drawing board vi to trace out and digitize an old diagram and
By woodman08 in forum Logic Trace CNC/DXFReplies: 0Last Post: 02-10-2019, 12:58 AM -
logic trace 2018 digitizing a clock diagram and building the project
By woodman08 in forum Logic Trace CNC/DXFReplies: 0Last Post: 10-30-2018, 08:21 PM
Tags for this Thread
Posting Permissions
