584,817 active members*
4,832 visitors online*
Register for free
Login

Thread: Boundaries

Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2019
    Posts
    1

    Boundaries

    I'm working on a contour cut of an island.

    The 3d model has boundaries within the final vector shape.

    The software Vectric V carve pro is cutting these boundaries within the vector shape.

    I want the model boundaries to not be cut.

    I cant figure out how to do this.

    Here is a pic , he oval is the final vector shape , you cabn see the 2 cuts at the extreme left/right of the oval.
    Last edited by stevejc; 12-02-2019 at 01:24 AM.

  2. #2
    Join Date
    Dec 2003
    Posts
    1206

    Re: Boundaries

    Have you tried moving those boundaries to a new layer and then turning that layer off before you click on calculate for a new toolpath? You could also use a third layer if you wanted to specify different boundaries.I like to use different colours for boundary or construction layers to save complications.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •