584,842 active members*
4,528 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2005
    Posts
    82

    Meldas 500 Alarm S01 Servo alarm 003A-Z

    Hello
    My CNC lathe with Meldas 500 Control.
    The first turn On in the Morning.
    It always alarm as
    S01 Servo alarm 003A-Z
    After turn on with Emergency press down..
    Then No alarm.
    wait a few minute or up to 30 minute or 1 hour.
    ( with try On/Off many time )
    Then it can turn on and ready to use.
    after that. no problem whole day.
    .It only happen the first power ON each day only.

    If Any one can help me any suggestion. will be appreciated.

  2. #2
    Join Date
    Aug 2005
    Posts
    82
    I test dis connect UVW of Z motor.
    Then Turn on. Machine can READY every time.
    X axis can move or HOME position .No problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •