I have a question about the Program Limits window in the Toolpath Screen.
It is when I use a work offset ( the x,y zeros for G54 are not the machine home).
So my code only refers to locations based on G54. The Gcode doesn't refer to G53, I checked.
When I choose G54 , the Program Limits window ( the actual numbers) include distance back to the machine home. That in effect makes it seem that the Gcode "User space", for lack of a better term, is different than where the cutter will actually travel in.
The animated screen actually has a dashed line going back to machine home.
Something doesn't seem right to me.
Any suggestions, or is there something I don't know?