544,018 active members*
2,409 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Help needed - Fanuc Programs backup
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Dec 2019
    Posts
    2

    Help needed - Fanuc Programs backup

    Hello all, I'm new and learning programming. Can someone please help me on backing up Fanuc programs all at once in individual files? I tried O-9999 but it saves as ALLPROG.txt and I need individual program backup for easy access.

    Not sure if there's any specific format I can insert to get it worked. Please helpppp

  2. #2
    Member
    Join Date
    May 2016
    Posts
    503

    Re: Help needed - Fanuc Programs backup

    It depends what control you are on

  3. #3

    Re: Help needed - Fanuc Programs backup

    I know of no way to do that. The closest thing to do is do what you've already done by copying them all at once, then take that file and separate them out form each other. Very simple copy and paste.

    All you need to do is put a percent (%) sign at the very beginning and very end of each file.

    %
    O3007(LATCH PLATE DRILLING)

    YOUR PROGRAM HERE

    M30
    %

  4. #4
    Registered
    Join Date
    Dec 2012
    Posts
    364

    Re: Help needed - Fanuc Programs backup

    Hi meghshar,

    You need DNC-software like f.e. Predator that can do the job.
    Or when your machine is connected by Ethernet it can also be done.
    Fanuc has a cheap tool for Ethernet connection and costs only €20,- in Europe ( $22,- )

    Fanuc Program Transfer Tool - A08B-9510-J515, latest version 15 can also handle BIN-files on PCMCIA-flashcard.

    Regards.
    Heavy_Metal.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •